What Should A Good Maf Sensor Read Lb Min. Web appears that the maf is reading low at higher tp % and pcm may be adding fuel for this reason. I'm wondering what a normal maf reading would be at idle on an lnf?
10 Things You Should Know About MAF Sensors
Web this tutorial will show you how to test the maf on your gm car, pick up, or suv using a digital multimeter and without using a scan tool. Web appears that the maf is reading low at higher tp % and pcm may be adding fuel for this reason. Have you ever had a maf out of range error code such as. On average at idle one reads 3.17 khz and 1.34 lb/min where as the other reads lower at 2.77 khz and.82. On a vehicle with a cabled throttle this test works quite. I believe it is supposed to be 0.00 and it ask an expert car questions ford repair i'm. It is installed between the air filter and the intake. Web when checking maf sensor readings, be sure to identify the unit of measurement. Web i have 2 stock maf sensors both reading different. This looks suspect especially compared to all my other.
Web what should maf sensor read at idle lb? Web take a look at the scan snapshot in fig 3. Since total fuel trim stays well within the 0 ±10% range throughout the. Web from the reading i was doing a few months back, some folks have said that flywheel hp=lb/min x 10 (roughly). I believe it is supposed to be 0.00 and it ask an expert car questions ford repair i'm. And just for grins and comparisons, on my last. If the engine is idling correctly, the mass airflow (maf) sensor's pid value should read anywhere between 2 to 7. On average at idle one reads 3.17 khz and 1.34 lb/min where as the other reads lower at 2.77 khz and.82. The scan tool may report the information in grams per second (gm/s) or pounds per minute. Web i have 2 stock maf sensors both reading different. I’m on interstate now cruising @77mph and maf is reading 15.1.
